3. Use [PAGE DOWN] or [PAGE UP] to successively open the following selection menus and
use the rotary control [–] / [+] or the buttons [–] | [+] to adjust the settings for the acti‐
vated trigger.
Selection menu Value range
VOICE TYPE Kick, Snare, Tom, Ride, Crash, Hi-Hat, Metro, Extras
VOICE Voice selection, see
VOLUME Volume
REVERB Reverb eect
PITCH Pitch
PAN Position within the stereo signal (panorama right / left)
4. Quit the selection menu with [EXIT].
ð
Use [–] | [+] in the following saving dialogue to specify the memory location. Existing
data will be overwritten.
5. Conrm with [ENTER] or cancel saving with [EXIT].
6. Select - if necessary - the next trigger, to which you want to programme a sound. Use
[EXIT] to exit the Edit mode.
Operating
MPS-750X
27
To Next Page
Loading...
