A drum kit is a compilation in which a certain sound and several sound parameters are
assigned to each trigger. Selecting dierent drum kits lets you customise the sound of your e-
drum sets in seconds to the desired music genre.
1. Press [KIT].
ð
The rst kit appears on the display.
2. Use the [–] / [+] buttons or the [–] / [+] rotary control to select the desired kit.
The preprogrammed sounds of the drum module can be programmed to any of the connected
pads. So you can create user kits and store them in the device. To do so proceed as follows:
1. First, call up one of the available drum kits (see previous chapter) and use [EDIT] to
switch to Edit mode.
2. Hit the pad (Trigger) to which you want to programme a certain sound or press [DRUM]
repeatedly until the desired pad is shown on the display. Additionally select the specic
trigger for multiple assigned pads.
Selecting a drum kit
Customising a drum kit
Operating
e-drum module
26
To Next Page
Loading...
