The drum module oers the possibility to record up to 15 user drum tracks in the operating
modes ‘Kit’ or ‘Pattern’. To do so proceed as follows:
1. Activate one of the operating modes ‘Kit’ or ‘Pattern’.
2.
Press the record button to activate the Recording mode.
3. If desired, specify the metronome settings for the recording.
4.
Press the record button again to start recording.
5.
Use the Stop button to pause the recording and the record button to restart it.
To nally stop recording press the Stop button .
ð
The display shows the message ‘Save the song to’ .
6. Use [–] | [+] to specify the memory location. Existing data will be overwritten.
7. Conrm with [ENTER] or cancel saving with [EXIT].
You can run along a style in the "Pattern" mode.
Recording function
Operating
e-drum module
30