thomann SP- User Manual

The button is used to choose the MIDI CTRL
channel, from:1~16.
Pressing this button to get into CHANNEL
setting mode, the LED display the current default
channel value XX, the CHANNEL button indicator
light up.
Use the [ + ] button, the [ - ] button or numeric
button to choose CHANNEL.
You can choose channel allowed circlularly by
pressing the [ + ] or the [ - ] button .
You can also set channel with the numeric button,
after press the first number, channel indicator
flashes and wait for press the second number,
when you finish pressing the second number, it
will stop flash. If you does not press any button
in 2 seconds , it will exit the number setting
status automatically.
If you press the [COMMAND] button or [VALUE]
button, it will get into correspond mode, and the
indicator of the corresponding button indicator
turn on, the CHANNEL indicator go off.
If you press the [MIDIOUT] button, it will get
into midiout mode.
In COMMAND mode, press the [VALUE]/
[CHANNEL] button to enter into VALUE and
CHANNEL setting mode, corresponding button
indicator turn on, the COMMAND indicator go off.
If you press the [MIDIOUT] button, it will enter
into midiout mode and send out midi control
message.
Press the [COMMAND] button continuously to
select the next command type (as follows).
Press the ｡COMMAND｡
button continuously
NO.
Adj ust digit val ue
Display(def aul t) Commandtyp e name
1
2
3
4
0-127
128
129
130
001
Cn
Dn
En
Cn
Dn
En
Bn
VOICE
STYLE
SONG
VOICE
STYLE
SONG
VOICE
STYLE
SONG
once
VOICE
STYLE
SONG
twice
thrice
quartic
22
Channel
4.
5.
6.
1.
2.
3.
4.
5.
VOICE
STYLE
SONG
VOICE
STYLE
SONG
VOICE
STYLE
SONG

thomann SP- Specifications

General

Keyboard	88 keys, weighted hammer action
Polyphony	128 notes
Effects	Reverb, Chorus
Connections	USB, MIDI, Headphone, Pedal
Included Accessories	Sustain Pedal