thomann SP- User Manual

Press this button to enter into VALUE setting
mode, the indicator is on, the LED will show the
default VALUE as 064.
Use the [ + ] button, the [ - ] button or numeric
button to set VALUE value from 0 Ł127.
you can set value allowed circlularly by pressing
the [ + ] button or the [ - ] button .
you can also set value with the numeric button,
after you press the first number, the value
indicator flashes and wait for press the second
number, finish pressing the second, if still allow
press the third number, the indicator continues
to flash, waiting for press the third number,
when you finish pressing the third number, it will
stop flash.If you does not press any button in 2
seconds , it will exit the number setting status
automatically.
If you press the [COMMAND] button or the
[CHANNEL] button , it will get into correspond
mode and its button indicator turn on, the VALUE
indicator go off.
If you press the [MIDIOUT] button, it will get
into MIDIOUT mode.
23
Value
VOICE
STYLE
SONG
VOICE
STYLE
SONG
VOICE
STYLE
SONG
Press [MIDIOUT] button to sent out a set of
MIDI control message.
Press this button, the indicator of that button
flash within 2 seconds, when finish sending out
MIDI CONTROL message, the indicator go off.
Press this button doesn't change current mode
after sending out MIDI CONTRO Lessage.
Continuous pressing the [MIDIOUT] button, it
will send out same MIDI CONTROL message.
MIDI OUT
1.
2.
1.
2.
3.
4.

thomann SP- Specifications

General

Keyboard	88 keys, weighted hammer action
Polyphony	128 notes
Effects	Reverb, Chorus
Connections	USB, MIDI, Headphone, Pedal
Included Accessories	Sustain Pedal