If you want the device to receive information via the MIDI interface, you can select the desired
transmission channel.
Command MIDI Note-
on
Note
number
Entry
Fader Value 0×90 00×00–0×12 Fader number
Fader Page 0×90 0×13 Page number
Chase Page 0×90 0×14 Page number
Scene Page 0×90 0×15 Page number
Macro Page 0×90 0×16 Page number
Fixture Page 0×90 0×17 Page number
Clear 0×90 0×18
Type 0×90 0×19 Latch: Several number buttons can be
selected at the same time.
Swop: Only one number button can be
selected at a time.
Setting the MIDI channel
Operating
DMX Invader 1024 NET
37
To Next Page
Loading...
