6.5 Macros
The individual combinations of manual settings, scenes, chasers and shapes can be stored
together in macros. The device can record 31 macros that are accessed via the buttons.
1. Press [PROGRAM] to enter the Edit mode.
ð
The [PROGRAM] LED ashes.
2. Press [MACRO].
3. Use the number buttons [1 … 31] to assign a number to the macro.
ð
The device will now record all subsequent steps. At this, manual settings, scene set‐
tings and chaser settings can be combined.
4. To exit Edit mode, press [PROGRAM].
1. Press [MACRO].
2. Press the number buttons [1 … 31] twice with the number of the macro you want to
play.
ð
The macro is being executed.
Recording a macro
Executing a macro
Operating
DMX controller
54
To Next Page
Loading...
