1. Press [STEP +] or [STEP -] to select the step in a chase you want to edit.
2. Press and hold [TIME] while turning the jog wheel [X/SPEED] to set the running speed of
the current step.
3. Press and hold [TIME] while turning the jog wheel [Y/CROSS] to set the fade time before
and after the current step.
1. Press [FIXTURE (A)] or [FIXTURE (B)] and the number buttons [1 … 31] to select the
external device you want to assign to the chase.
2. Set the values for the external device with the channel faders [1 … 18] .
3. To exit Edit mode, press [PROGRAM].
ð
Chase editing is complete.
Editing a step in a chase
Assigning external devices to a
chase
Operating
DMX Invader 1024 NET
53
To Next Page
Loading...
