You can make the following settings when dynamically assigning DMX addresses:
If the device to be assigned does not have a ne adjustment channel for Pan and Tilt,
‘**’ should be set as the value.
Name Meaning Value
1. Channel Num Total number of device channels ** … 36
2. XH Oset Channel Pan movement, coarse adjust‐
ment channel (8 bit)
** … 36
3. XL Oset Channel Pan movement, ne adjustment
channel (8 bit)
** … 36
4. X Dir Pan movement, direction <, >
5. YH Oset Channel Tilt movement, coarse adjust‐
ment channel (8 bit)
** … 36
Operating
DMX controller
46
To Next Page
Loading...
