1. Keep pressing [SET] until the number in the [GAIN] field blinks on the display.
2. Use the arrow keys to change the transmitter gain in increments of 3 dB (–3 dB, 0 dB,
3 dB, 6 dB, 9 dB).
Press [SET] to confirm the selection. Press the main switch to close the menu without
making any changes.
1.
Keep pressing [SET] until the symbol blinks on the display.
2. Use the arrow keys to change the transmitter power (5 mW, 10 mW, 20 mW).
Press [SET] to confirm the selection. Press the main switch to close the menu without
making any changes.
Setting gain
Setting transmitter power
Instructions for use
free solo PT
37
To Next Page
Loading...
