Setting time
1. Press MODE until [CLOCK ADJUSTMENT] scrolls across display
2. Turn MULTI JOG wheel to set hour
3. Press or to go to minute digits
4. Turn MULTI JOG wheel to set minute
5. Press SET/PROG.
Setting timer
1. Press MODE> until [TIMER MODE SET] scrolls across display
2. Turn MULTI JOG wheel until either [TIMER ON] or [TIMER OFF] scrolls across the display
3. Press and the message [ON TIME] scrolls across display
4. Turn MULTI JOG wheel to set hour
5. Press to go to minute digits
6. Turn MULTI JOG wheel to set minute
7. Press and the message [OFF TIME] scrolls across display
8. Repeat steps 4 to 6 once
9. Press and the message [SOURCE SELECT] scrolls across display
10. Turn MULTI JOG wheel to select among CD, TAPE and TUNER
11. Press to:
select CD track to play by turning MULTI JOG wheel
OR
select preset radio station by turning MULTI JOG wheel
12. Press and [VOL. SET] appears
13. Turn MULTI JOG wheel to set volume level
Tip: During timer setting process, you may press to go back to your previous settings.
Setting timer on/off
1. Press MODE until [TIMER MODE SET] scrolls across display
2. Turn MULTI JOG wheel until [TIMER ON] scrolls across display and the clock icon appears to
activate timer function or turn wheel until [TIMER OFF] scrolls across display and the clock icon goes
off to deactivate timer function
Adjusting display brightness
1. Press MODE until [DIMMER MODE SET] scrolls across display
2. Turn MULTI JOG wheel to select DIM 0, DIM 1, DIM 2 or DIM 3
9
Using MODE
EN
AM1450 Eng Version 3/27/00, 4:34 PM9
To Next Page
Loading...
