EN
EN
7
Operating the Clock
Setting Clock
Your digital clock operates on a 24-hour
standard mechanism.
1. Slide the TIME SET: LOCK/WAKE 1/
WAKE 2/CLOCK switch to CLOCK to
enter clock setting mode.
2. Press REV or FWD to set the time.
Press and hold the respective buttons
to fast reverse or fast forward clock
time.
3. Slide the TIME SET: LOCK/WAKE 1/
WAKE 2/CLOCK switch to LOCK.
Tip:Tip:
Tip:Tip:
Tip:
The “:” flashes on the display in
clock setting mode.
Setting Wake Time
1. Slide the TIME SET: LOCK/WAKE 1/
WAKE 2/CLOCK switch to select
WAKE 1 or WAKE 2 setting mode.
2. Press REV or FWD to set wake time.
Press and hold the respective buttons
to fast reverse or fast forward wake
time.
3. Slide the TIME SET: LOCK/WAKE 1/
WAKE 2/CLOCK switch back to the
LOCK position.
Selecting Wake Source
Press WAKE 1 or WAKE 2 repeatedly to
select wake source for the corresponding
wake setting (tone / radio ).
The respective wake indicator lights
when the wake function is activated.
Tip: Tip:
Tip: Tip:
Tip:
The “:” flashes on the display in
wake time setting mode.
6
Radio
Turning on/off the Radio
Press the button to turn on the
radio.
Press again to turn off the radio.
Selecting Bands
Slide the band switch on the side of
the unit to select between FM and AM
band.
Tuning to Stations
Turn the TUNING knob on the side of
the unit to tune up and down radio
frequency.
Built-In AFC
The Built-In Automatic Frequency
Control (AFC) works only on FM. It
helps to reduce drift on FM reception
and to keep the radio locked in on the
FM station to which it is tuned.
Antennas
AM Antenna - A built-in ferrite rod
antenna eliminates the need for an
outside antenna for AM reception.
Rotating the unit slightly may improve
reception of distant AM stations.
FM Aerial wire - Move and extend the
wire for better FM reception
Turning on/off the
Night Light
Press the LIGHT button on the top of
the unit to turn on the night light.
Press again to turn off the night light.
Night Light
To Next Page
Loading...
