EN-23
Clean the down-view sensor
Clean drive wheels and universal wheel
Trouble shooting
No. Prompt Tone
Cause of
Failure
Solution
1
Dust container not
installed
Dust container
removed and
not installed
Return the dust container to
the Robot and press the
cleaning
2
Battery failure
Abnormal
battery
charging
Contact after-sales test
battery
3
Please check if the
wheel is stuck
Wheel jammed
Check whether the wheel is
entangled with foreign
If you do not use the product
for a longtime, please fully
charge it before storing. Turn
off the robot and take care to
supplying power to it every 3
months to maintain the
battery life. If the battery is
over discharged or is not used
for a long time, the product
may not be able to be
charged. Please contact our
company for after-sales
maintenance, do not
disassemble it yourself.
To Next Page
Loading...
