Set the value for sending a request to the destination. All the frames of a length greater than the
threshold that you set here will be sent with the four-way frame exchange. And, a length less than
or equal to the value that you set will not be proceeded by RTS. (Value range: 0~ 2347)
54g
TM
Network Mode:
There are three modes for you to choose, please check the specification of your wireless card
and
choose
a proper setting.
54g
TM
Protection:
Select Auto to turn on the 54g
TM
protection; select Off to turn down the protection.
Xpress
TM
Technology:
When Xpress is turned on, aggregate throughput (the sum of the individual throughput speeds of
each client on the network) can improve by up to 27% in 802.11g-only networks, and up to 75%
in mixed networks comprised of 802.11g and 802.11b standard equipment.
Rate:
It decides the speed of data transmission. There are several rates provided here for you to choose.
Choose any one of it according to your needs by using the drop-down menu.
Output Power:
To reduce the output power.
To Next Page
Loading...
