What to do if my Thor Kitchen LRG are sparking but there is no flame?
If your Thor Kitchen Ranges are sparking but the flame isn't igniting, the gas shut-off valve might be in the ‘OFF’ position. To fix this, simply turn the shut-off valve to the ‘ON’ position.
What to do if my Thor Kitchen Ranges burner flame goes out at the low setting?
If the burner flame on your Thor Kitchen Ranges goes out at the low setting, it could be due to low gas supply pressure or obstructed air intake holes around the knobs. Contact your gas company to check the gas supply pressure. Also, remove any obstructions around the air intake holes.
Why do the igniters on my Thor Kitchen Ranges spark continuously after the flame ignites?
Continuous sparking after flame ignition in your Thor Kitchen Ranges can be due to reversed power supply polarity or wet/dirty igniters. Have the polarity corrected, and dry or clean the igniters.
Why are the burner flames on my Thor Kitchen Ranges so large and yellow?
Large, yellow burner flames on your Thor Kitchen Ranges can be caused by several issues: clogged burner bezel ports, improperly positioned burner ports or caps, using the wrong type of gas, or a faulty/incorrectly set regulator. To resolve this: * Clean burner bezel ring ports with a straightened paper clip, needle, or wire. * Remove and carefully reinstall the burner bezel and caps. * Ensure the cooktop matches the natural gas supply. * Check the installation, replace the regulator, or set the regulator for the proper gas.
What to do if my Thor Kitchen LRG Ranges foods over-cooked or under-cooked?
If your foods are consistently over-cooked or under-cooked in your Thor Kitchen Ranges, the cooking time or temperature may be incorrect. Adjust the time, temperature, or rack position accordingly.
What to do if my Thor Kitchen Ranges burner flames are very large and yellow?
If the burner flames on your Thor Kitchen Ranges are excessively large and yellow, it could be due to several reasons. The burner bezel ports might be clogged, so try cleaning them with a straightened paper clip, needle, or wire. Also, the burner ports or burner caps may not be positioned correctly; carefully remove and reinstall them. Ensure that your cooktop matches the natural gas supply. Finally, the regulator might be faulty or set for the wrong type of gas; check the installation, replace the regulator, or set it for the proper gas type.
What to do if some burners will not light on my Thor Kitchen Ranges?
If some burners on your Thor Kitchen Ranges won't light or the flames don't burn all around the burner cap, it could be due to wet, dirty, or misaligned burner parts or igniters. Ensure that the burner parts and igniters are clean, dry, and correctly assembled.
Why did the flames suddenly go out on my Thor Kitchen LRG Ranges?
If the flames on your Thor Kitchen Ranges suddenly went out, it might be because a draft or spill extinguished the flame. The burner will detect this and automatically relight. However, if there was a large spill, turn the burners off and clean the burners and sump area.
What to do if my Thor Kitchen LRG Ranges sparking but no flame ignition?
If your Thor Kitchen Ranges is sparking but the flame isn't igniting, check whether the gas shut-off valve is in the ‘OFF’ position. If so, turn the shut-off valve to the ‘ON’ position.
What to do if my Thor Kitchen LRG oven will not heat?
If your Thor Kitchen Ranges oven will not heat, ensure the oven settings are correct. Follow the mode selection and clock settings as specified in the Oven Operation section of the manual.
General| Fuel Type | Gas |
|---|---|
| Convection Oven | Yes |
| Self-Cleaning | Yes |
| Material | Stainless Steel |
| Ignition Type | Electronic |
| Width | 36 inches |
| Oven Capacity | 4.2 cubic feet |
| BTU Rating (Burners) | 12, 000 BTU |
| Weight | 250 lbs |
| Griddle Option | Optional |
To Next Page
