5.
Gas Supply Requirements
Installation of this range must conform with local codes, or in the absence of local codes, with
national Fuel Gas Code，ANSIZ223.1 / NFPA 54.
In Canada, installation must conform to the current natural Gas Installation /code, CAN 1-1.1-M81
and with local codes where applicable.
This range has been design-certified according to ANSIZ21.1a, latest edition.
Safety Tips for Gas Operation
✓ Keep appliance area clear and free from combustible materials, gasoline, and other
flammable vapors.
✓ Do not obstruct the flow of combustion air into the range and ventilation air away from the
range.
✓ Ventilation: it is a must that the unit be set under a powered, vented exhaust hood of
sufficient size and capacity.
✓ Before installing the range, you must locate and secure the included anti-tip bracket to the
wall for your range.
✓ The use of cabinets for storage above the appliance may result in a potential burn hazard.
Combustible items may ignite; metallic items may become hot and cause burns. If a cabinet
storage is to be provided, the risk can be reduced by installing a range hood that projects
horizontally a minimum of 5" (12.7cm) beyond the bottom of the cabinets.
To Next Page
Loading...
