Need help?Do you have a question about the THORENS TD 318 MK III and is the answer not in the manual?
Details the terms and conditions of the manufacturer's warranty for the turntable.
Step-by-step guide for removing the turntable and its components from the packaging.
Instructions for connecting the turntable to a power source and audio system.
Information regarding the tonearm and the pickup cartridge setup.
Procedure for installing, aligning, and adjusting the phono cartridge.
Instructions for setting stylus tracking force and adjusting the tonearm lift.
Procedure for setting the anti-skating force to counteract inward tonearm pull.
Explains how to use the controls for speed selection and playback.
Adjusting the suspended chassis and highlights features of the TD 316 Mk III.
Provides detailed technical data and specifications for the turntables.
Details the terms and conditions of the manufacturer's warranty for the turntable.
Step-by-step guide for removing the turntable and its components from the packaging.
Instructions for connecting the turntable to a power source and audio system.
Information regarding the tonearm and the pickup cartridge setup.
Procedure for installing, aligning, and adjusting the phono cartridge.
Instructions for setting stylus tracking force and adjusting the tonearm lift.
Procedure for setting the anti-skating force to counteract inward tonearm pull.
Explains how to use the controls for speed selection and playback.
Adjusting the suspended chassis and highlights features of the TD 316 Mk III.
Provides detailed technical data and specifications for the turntables.
General| Drive System | Belt Drive |
|---|---|
| Platter Weight | 1.5 kg |
| Signal-to-Noise Ratio | > 70 dB |
| Anti-skating | Adjustable |
| Weight | 8.5 kg |
| Type | Belt Drive |
| Speed | 33, 45 RPM |
| Motor | Synchronous motor |
| Rumble | > 70 dB |
| Tracking Force Range | 0 - 3 g |
| Dimensions | 440 x 350 x 140 mm |
To Next Page