Need help?Do you have a question about the THORENS TD 295 MK IV and is the answer not in the manual?
To reduce risk of electric shock, do not remove the cover. No user-serviceable parts inside.
Do not expose the appliance to rain or moisture to prevent fire or shock hazard.
Explanation of graphical symbols, including lightning flash and exclamation point.
Check if all supplied items, including plinth, belt, platter, and accessories, are present.
Loop drive belt around sub-platter and motor pulley, then place the main platter.
Save the shipping box and packing material for potential future transportation.
Connect the low-tension plug of the mains adapter to the rear socket of the record player.
Connect RCA leads to the phono input jack of your amplifier, ensuring correct polarity.
Use a special RCA to DIN adapter for amplifiers with a 5-pin DIN socket.
Connect the ground lead between the record player and the amplifier's ground post (GND).
Details the pre-mounted Thorens TP 41 tonearm and Audio Technica AT-95E pickup cartridge.
Guide for connecting color-coded litz wires to cartridge pins, including lettered alternatives.
Attach the counterweight to the tonearm tube and balance it until total equilibrium is achieved.
Adjust tracking force by rotating the counterweight until the dial indicates the recommended value.
Explains skating force and how anti-skating force offsets it using an anti-skating weight.
Hook the anti-skating weight to the notched bar and select the notch based on tracking force.
Select platter speed (33/45 rpm) and use the Start/Stop button to begin playback.
Lift the tonearm using the lift lever and position it above the record groove for playback.
The turntable features an automatic shut-off mechanism when the stylus reaches the run-out groove.
Details drive system, motor type, and available speeds (33/45 rpm).
Specifications for platter, tonearm, and anti-skating mechanism.
Specifications for automation, switch-off control, and cable capacity.
Details power supply, physical dimensions, and overall weight of the record player.
Seek assistance from your Thorens dealer or distributor for questions or problems.
Register your product to receive up-to-date information and special offers via the website.
To reduce risk of electric shock, do not remove the cover. No user-serviceable parts inside.
Do not expose the appliance to rain or moisture to prevent fire or shock hazard.
Explanation of graphical symbols, including lightning flash and exclamation point.
Check if all supplied items, including plinth, belt, platter, and accessories, are present.
Loop drive belt around sub-platter and motor pulley, then place the main platter.
Save the shipping box and packing material for potential future transportation.
Connect the low-tension plug of the mains adapter to the rear socket of the record player.
Connect RCA leads to the phono input jack of your amplifier, ensuring correct polarity.
Use a special RCA to DIN adapter for amplifiers with a 5-pin DIN socket.
Connect the ground lead between the record player and the amplifier's ground post (GND).
Details the pre-mounted Thorens TP 41 tonearm and Audio Technica AT-95E pickup cartridge.
Guide for connecting color-coded litz wires to cartridge pins, including lettered alternatives.
Attach the counterweight to the tonearm tube and balance it until total equilibrium is achieved.
Adjust tracking force by rotating the counterweight until the dial indicates the recommended value.
Explains skating force and how anti-skating force offsets it using an anti-skating weight.
Hook the anti-skating weight to the notched bar and select the notch based on tracking force.
Select platter speed (33/45 rpm) and use the Start/Stop button to begin playback.
Lift the tonearm using the lift lever and position it above the record groove for playback.
The turntable features an automatic shut-off mechanism when the stylus reaches the run-out groove.
Details drive system, motor type, and available speeds (33/45 rpm).
Specifications for platter, tonearm, and anti-skating mechanism.
Specifications for automation, switch-off control, and cable capacity.
Details power supply, physical dimensions, and overall weight of the record player.
Seek assistance from your Thorens dealer or distributor for questions or problems.
Register your product to receive up-to-date information and special offers via the website.
Drive and Operation| operation | semi-automatic |
|---|---|
| drive system | internal flat drive belt |
| motor | electronically controlled AC synchronous motor |
| speeds | 33-1/3, 45 rpm |
| speed select | electronically |
Platter and Tonearm| platter | 12” / 2.3 kg |
|---|---|
| tonearm | THORENS TP 41 |
| pick-up cartridge | AT-95E |
Power and Dimensions| power supply | external mains adaptor (115-230 V / 50-60 Hz depending on type) |
|---|---|
| dimensions | 430 x 145 x 365 mm (W x H x D) |
| weight | 8.5 kg |
To Next Page
