Need help?Do you have a question about the THORENS TD 206 and is the answer not in the manual?
Explains symbols like lightning flash and exclamation point used in the manual.
Instructions for proper disposal of electronic waste in the EU.
Adjusting the plinth feet to ensure the turntable is perfectly horizontal.
Fine-tuning the turntable's rotation speed using adjustment screws.
Connecting the universal plug-in power supply to the turntable and mains.
Connecting the turntable's audio output and earth wire to the amplifier.
Adjusting the tonearm headshell overhang and azimuth using screws.
Adjusting the vertical tracking angle by using spacers or raising/lowering the tonearm.
Explains symbols like lightning flash and exclamation point used in the manual.
Instructions for proper disposal of electronic waste in the EU.
Adjusting the plinth feet to ensure the turntable is perfectly horizontal.
Fine-tuning the turntable's rotation speed using adjustment screws.
Connecting the universal plug-in power supply to the turntable and mains.
Connecting the turntable's audio output and earth wire to the amplifier.
Adjusting the tonearm headshell overhang and azimuth using screws.
Adjusting the vertical tracking angle by using spacers or raising/lowering the tonearm.
General| Type | Belt-drive audio turntable |
|---|---|
| Operation | Manual |
| Nominal speeds | 33 1/3, 45 RPM |
| Platter material | Aluminum/Acrylic |
| USB ports quantity | - |
Weight and Dimensions| Weight | 5600 g |
|---|---|
| Platter weight | 900 g |
| Product dimensions (WxHxD) | 475 x 370 x 125 mm |
To Next Page
