Need help?Do you have a question about the THORENS TD 2001 and is the answer not in the manual?
Describes the internal sub-chassis construction and the 24-pole synchronous motor drive.
Details re-lubrication requirements for the platter bearing and maintenance for motor bearings.
Advises against adjusting tonearm bearings and recommends replacement for malfunctions.
Explains how to adjust the sub-chassis suspension for level alignment using leaf-springs.
Describes adjusting the pulley height to align the drive belt correctly via a screw.
Guides on adjusting the lift-support height for proper stylus clearance above the record.
Provides voltage and current data for troubleshooting various circuit states and components.
Describes the internal sub-chassis construction and the 24-pole synchronous motor drive.
Details re-lubrication requirements for the platter bearing and maintenance for motor bearings.
Advises against adjusting tonearm bearings and recommends replacement for malfunctions.
Explains how to adjust the sub-chassis suspension for level alignment using leaf-springs.
Describes adjusting the pulley height to align the drive belt correctly via a screw.
Guides on adjusting the lift-support height for proper stylus clearance above the record.
Provides voltage and current data for troubleshooting various circuit states and components.
General| Drive System | Belt drive |
|---|---|
| Speeds | 33 1/3, 45 RPM |
| Tonearm | TP 90 |
| Wow and Flutter | <0.05% |
| Effective Tonearm Length | 232.8 mm |
| Cartridge | Not included |
| Weight | 10 kg |
| Motor | Synchronous motor |
| Platter | 300 mm diameter |
| Rumble | -70 dB (DIN-B) |
To Next Page
