Need help?Do you have a question about the THORENS TD 321 MK II and is the answer not in the manual?
Securely mount and align the pickup cartridge using supplied hardware and alignment guide.
Adjust the tonearm's vertical bearing height for parallel record surface alignment.
Set the correct stylus tracking force by adjusting the counterweight and dial.
Compensate for skating force by adjusting the antiskating dial based on tracking force.
Use the lift knob to precisely raise or lower the tonearm onto the record.
Unit automatically lifts tonearm and powers off at record end.
Turn speed knob to STOP to pause or end playback manually.
Securely mount and align the pickup cartridge using supplied hardware and alignment guide.
Adjust the tonearm's vertical bearing height for parallel record surface alignment.
Set the correct stylus tracking force by adjusting the counterweight and dial.
Compensate for skating force by adjusting the antiskating dial based on tracking force.
Use the lift knob to precisely raise or lower the tonearm onto the record.
Unit automatically lifts tonearm and powers off at record end.
Turn speed knob to STOP to pause or end playback manually.
General| Speeds | 33 1/3, 45 RPM |
|---|---|
| Speed Control | Electronic |
| Cartridge | Not included |
| Drive Method | Belt Drive |
| Wow and Flutter | 0.03% |
| Anti-skating | Magnetic |
| Dimensions | 170 mm |
To Next Page