Thrane&Thrane EXPLORER 700 Getting Started Guide

35 pages

To Next Page

BGAN solutions guide

Getting started

with the

EXPLORER

700

Version 01

20.04.07

www.inmarsat.com/bgan

Whilst the information has been prepared by Inmarsat in good faith, and all reasonable efforts have been made to ensure its accuracy, Inmarsat makes no warranty or

representation as to the accuracy, completeness or fitness for purpose or use of the information. Inmarsat shall not be liable for any loss or damage of any kind, including

indirect or consequential loss, arising from use of the information and all warranties and conditions, whether express or implied by statute, common law or otherwise, are

hereby excluded to the extent permitted by English law. INMARSAT is a trademark of the International Mobile Satellite Organisation, Inmarsat LOGO is a trademark of

Other manuals for Thrane&Thrane EXPLORER 700

User Manual224 pages

Quick Start Guide4 pages

Questions and Answers:

J
Javier WilcoxAug 19, 2025
Why won't my Thrane&Thrane Antenna EXPLORER 700 switch on or stay on with battery?
- L
  Lisa MooreAug 19, 2025
  Your Thrane&Thrane Antenna EXPLORER 700 may not be switching on or staying on due to several reasons: * The battery may need recharging. Check the battery indicator in the display and recharge if necessary. * The battery might not be inserted properly. Remove and re-insert the battery, ensuring it's correctly placed and the latches are locked. * The battery contacts could be dirty or damaged. Clean the contacts; if damaged, replace the battery.
C
Caroline AndersonAug 21, 2025
How to fix Thrane&Thrane Antenna when internet connection cannot be established?
- W
  William GarrettAug 21, 2025
  If you're unable to establish an internet connection with your Thrane&Thrane Antenna, consider the following: * The signal strength might be too low. Ensure the antenna is correctly pointed and adjust for the highest possible signal strength (ideally 45 dBHz or more). * If using a dial-up connection, make sure you've opened the dial-up connection. * For dial-up connections, verify that the phone number is set to *98# to connect to the internet, and then open the dial-up connection.