Connecting to
your Web Cube.
Wi-Fi is automatically on when the Web Cube
is turned ‘On’. You’ll need to make sure that
the device you want to connect can connect
through a Wi-Fi signal.
Connecting a laptop
or computer.
Scan for available wireless network
connections on your computer.
Select the Wi-Fi network name (SSID)
that is shown on your Web Cube.
The wireless network has a security
code, you must enter the correct
Wi-Fi key – see opposite for details
on where to find these.
You can’t connect a computer
through the USB port on your
Web Cube.
Handy hint.
SSID: This is the Wi-Fi name
of your Web Cube.
Wi-Fi Key: This is the unique
password to connect to your
Web Cube.
WPS: Wi-Fi protected setup.
Additional security level only
available on certain devices.
8
<224mm>
<112mm>
PANTONE Green C: For positional purposes only – Do NOT Print
To Next Page
Loading...