Thrustmaster T-LCM Pedals - MECHANICAL SETTINGS FOR PEDAL SET; Adjusting Pedal Height; Adjusting Pedal Spacing

6/16
MECHANICAL SETTINGS FOR THE PEDAL SET
Adjusting the height of the pedals
- Using the included 2.5 mm Allen key (7), unscrew the two screws holding the metal pedal head (11)
and its plastic support (10) in place.
- Choose your preferred position in terms of height, and then fasten everything together again using
the screws.
Examples with the accelerator pedal:
Low position
High position
Number of different height positions per pedal:
- 3 for the accelerator pedal
- 2 for the brake pedal
- 2 for the clutch pedal
Adjusting the spacing of the three pedals
- Using the included 2.5 mm Allen key (7), unscrew the two screws holding the metal pedal head (11)
and its plastic support (10) in place.
- Choose your preferred position (to the left, centered or to the right), and then fasten everything
together again using the screws.
Examples with the brake pedal:
Left position Centered position (by default) Right position
Number of different spacing positions per pedal:
- 3 for the accelerator pedal
- 3 for the brake pedal
- 3 for the clutch pedal