Adjusting the inclination of the pedals
- Using the included 2.5 mm Allen key (7), unscrew the two screws holding the metal pedal head (11)
and its plastic support (10) in place.
- Next, rotate the plastic pedal head support (10) 180° (or change it), and then fasten everything
together again using the screws.
Examples with the accelerator pedal:
Less inclined position More inclined position Vertical position
(by default)
Number of different inclination positions per pedal:
- 3 for the accelerator pedal
- 3 for the brake pedal
- 3 for the clutch pedal
Adjusting the alignment of the pedals
- Install the plastic pedal head support (10) to move a pedal forward.
- Remove the plastic pedal head support (10) to move a pedal back.
Examples with the accelerator pedal:
Forward position (by default) Back position
To Next Page
Loading...
