Decreasing or eliminating the brake pedal’s preloading effect
For users who prefer more linear braking resistance, it is also possible to decrease or eliminate the
preloading effect of the central chrome-plated preloading spring (C).
To do so, slide 1 to 5 flat washers (8) onto the holding rod, in the middle of the central chrome-
plated preloading spring (C).
Please note: The more flat washers you add, the more the preloading effect will be decreased (or
eliminated altogether, in the event that you use all 5 flat washers).
Example of eliminating the preloading effect by using all 5 flat washers:
Important:
Adding these flat washers will also have the effect of reducing the brake
pedal’s mechanical travel.
To Next Page
Loading...
