Thrustmaster TSS Handbrake Sparco Mod - Connection Summary and Firmware Update; TSS Handbrake Connection Summary; Update TSS Handbrake Firmware

11/16
TSS HANDBRAKE CONNECTION SUMMARY ACCORDING TO THE
PLATFORM USED
TSS HANDBRAKE connection
PC
(HANDBRAKE mode
and SEQUENTIAL
SHIFTER mode)
To the PC, using the detachable male DIN / USB
cable (6). Compatible with all racing wheels on the
market.
PC
(SEQUENTIAL
SHIFTER mode only)
At the back of a compatible Thrustmaster racing
wheel base, using the detachable mini-DIN / DIN
cable (11).
PS4™
(HANDBRAKE mode
and SEQUENTIAL
SHIFTER mode)
At the back of a compatible Thrustmaster racing
wheel base, using the detachable mini-DIN / DIN
cable (11).
XBOX ONE®
(HANDBRAKE mode
and SEQUENTIAL
SHIFTER mode)
At the back of a compatible Thrustmaster racing
wheel base, using the detachable mini-DIN / DIN
cable (11).
UPDATING THE TSS HANDBRAKE’S FIRMWARE
The firmware included in the TSS HANDBRAKE’s base can be updated (meaning that it can be
upgraded to a more recent version, featuring product enhancements).
To display the TSS HANDBRAKE’s firmware version and update it, if required: on a PC, go to
http://support.thrustmaster.com, select Racing wheels / TSS HANDBRAKE, then select Firmware
and follow the instructions and the download and installation procedure.