INSTALLING THE TSS HANDBRAKE
The TSS HANDBRAKE can be attached to a variety of compatible supports (sold separately), using
the M6 threaded holes located on either side of the device and under its base:
• 3 threaded holes are located on the left side of the base.
• 3 threaded holes are located on the right side of the base.
• 8 threaded holes are located under the base.
The TSS HANDBRAKE cockpit installation template is available from
http://support.thrustmaster.com. Select Racing Wheels / TSS HANDBRAKE, then Template -
Cockpit Setup.
To Next Page
Loading...