5015500_04
4
• Load boat
onto saddles. It may be necessary to readjust the distance between
your saddles for a snug fit. Make sure boat is in line with vehicle.
• Ensure that
there is clearance between load bars & hull.
• Position saddles
so top edge contacts side of boat.
• Securely tighten
knobs. Ensure space between bracket and saddle is equal
on both sides of each assembly as you tighten the knobs.
5
• Always route
straps under the bar as shown.
NOTE: Never route straps through saddle.
• Ensure straps
do not go over cockpit cowling or other non-load bearing boat details before cinching straps.
To Next Page
Loading...
