Thule Top Deck 881 User Manual

5015500_04
TOP DECK
™
881
PARTS INCLUDED
part description part number qty.
A saddle / 753-3565 4
B hook / 853-5465 2
C carriage bolt M6 x 50mm / 915-0650-31 8
D metal bracket / 853-5513 4
E 3 wing knob / 753-0745 8
F 1/4" rope / 853-5466 2
G strap / 753-2030-04 2
• Load bars
must be at least 24" (610mm) apart for
safe use.
• Ensure that
boat does not contact vehicle while
loading or unloading; otherwise, damage to vehicle or
boat could occur.
• For extra
vehicle protection, place the Thule Water
Slide mat (#854, sold separately) or a towel on the
edge of the vehicle’s roof during loading/unloading.
• Ensure bottom
of hull is clean before loading to avoid
damaging boat surface.
• Always tie
down bow and stern of boat to vehicle
bumpers or tow hooks.
• Do not
exceed weight limitation of racks or factory
installed bars.
• Ensure load
carrier is properly installed and tight
to vehicle.
• Failure to
follow above guidelines voids warranty.
NOTE: After kayak use in salt water conditions,
please rinse off kayak carrier with fresh
water to keep salt residue off the rack.
WARNINGS / LIMITATIONS
A
C E F G
B D

Thule Top Deck 881 Specifications

General

Brand	Thule
Model	Top Deck 881
Category	Automobile Accessories
Language	English

Summary

General Warnings and Limitations

Installation Steps

Attach Saddle Assemblies to Bars

Securely attach saddle assemblies to the load bars using carriage bolts and wing knobs.

Position Saddles

Position the saddles on the load bars to match the approximate width of your boat.

Load Boat and Secure

Load the boat onto saddles, adjust positioning for a snug fit, and ensure clearance.

Route Straps

Route straps under the load bars and ensure they do not interfere with boat details.

Bow and Stern Tie Down

Carefully attach hooks to the rope ends and secure the rope to the vehicle.