5
Starting & Stopping the Engine
Always follow the proper starting procedure described below.
PREPARATIONS
Before Starting, turn the fuel valve ON and make sure bike is in NEUTRAL.
Specially for TSX-C 125 Because it has to be started in Neutral. TSX-C
140 can be started in gear but recommended to start in NEUTRAL
STARTING PROCEDURE
To restart a warm engine, follow the procedure for High Air Temperature
on page 27.
Normal Air Temperature
10° 35°C (50° 95°F)
1. Push the choke knob up all the way to fully ON.
2. (Using the Kickstarter) Lightly depress the kickstarter until
resistance is felt.en let kickstarter return to the top of its stroke.
With the throttle slightly open, operate the kickstarter. Kick from the
top of the stroke through to the bottom with a rapid, continuous motion.
Choke Knob Kickstart
To Next Page
Loading...