29
Air Cleaner
CLEANING
1. Unscrew Bolt
2. Remove the air cleaner
3. Gently wash the air cleaner in clean, nonammable(high ash point)
solvent such askerosene not gasoline. Aer cleaning,gently squeeze out
the remaining solvent.Avoid twisting or wringing the air cleaner.is
can tear the foam.
4. Inspect for tears or cracks in the foam orseams of the air cleaner. Re-
place the aircleaner if it is damaged.
5. Allow the air cleaner to dry thoroughly before applying oil. A wet air
cleaner will not fully absorb the oil.
6. Check anti-ame mesh for damages
7. Pour clean No Toil Biodegradabe or an equivalent over the entire sur-
face of the air cleaner. Use both hands to evenly spread the oil into the
air cleaner. Gently squeeze out any excess oil.
8. Install the air cleaner and screws back again.
Screw
Air Filter
Mesh
To Next Page
Loading...