2007.03.07Flow2 stairliftTab 04: Install, adjust and release
www.ThyssenKruppAccessibility.nl31
6 Releasing the product
6.1 Completing the CE inspection form
Check all parts of the CE inspection form and tick them off.
6.2 Clearing up the workplace
Tidy up the workplace after the stairlift has been installed. Take all the packaging materials with you
and make sure that no tools are left behind.
6.3 Instructing the user
1. The user manual and the quick start guide have already been given to the customer so that he
or she has read them.
2. Using the user manual, explain to the future user the use of the stairlift. Give sufficient
attention to the following issues:
- The use of the safety belt.
- The operation of the stairlift using the joystick in the armrest and using the call and park
units.
- The safety equipment.
- Charging the batteries.
- Switching the stairlift on and off (the stairlift must always be connected to a supply).
- Maintenance of the stairlift.
- The rectification of simple faults.
- Making a test ride.
6.4 Inspecting the installation and the safety measures (checklist)
CE checklist Score
Drive/chair unit
1. No damage to paint, upholstery or plastic covers.
2. All wiring is fitted correctly, and is not pinched anywhere.
3. All control buttons function correctly.
4. All nuts connecting the chair to the drive unit are tight.
5. The footrest is free of all treads.
6. The footrest is free of the wall.
To Next Page
Loading...
Need help?
General
