OPERATING MANUAL 1. SAFETY
ThyssenKrupp Aufzugswerke GmbH 7
1.2 General safety instructions
Information on the operating manual
Knowledge of the general safety requirements is a prerequisite for the safe
use and fail-free operation of this component.
This operating manual comprises the most important information how to
safely use the component.
The operating manual and, in particular, the safety information must be
observed by all persons who perform any work on the component.
In addition the rules and requirements concerning the regulations for
prevention of accidents which apply to the installation location must be
observed.
Duties of the owner and / or the installer
The owner and / or the installer ensure that only persons are authorized to
work at the component, who
are familiar with the requirements concerning safe working and prevention
of accidents and who were trained how to use the component.
have read the safety information and the warning notices in this operating
manual.
Note: check the employees working for compliance with the safety
regulations in regular intervals.
Duties of the employees
Persons who are authorized to perform work at the component are obliged
to observe the requirements concerning safe working and prevention of
accidents;
to read the safety information and the warning notices in this operating
manual prior to start working.
Training of the employees
Only trained and instructed, technically competent persons shall perform
work at the component.
The competence of the employees must be clearly defined for all tasks
concerning putting into service, operation, maintenance and repair work.
Organizational measures
The owner or the installer must provide the necessary personal protective
gear. All existing safety devices must be checked regularly in accordance
with the maintenance plan.
To Next Page
Loading...
Need help?
General
