Need help?Do you have a question about the ThyssenKrupp TW63 and is the answer not in the manual?
General| Drive Type | DC Drive |
|---|---|
| Series | TW63 |
| Output Current | 63 A |
| Frequency | 50/60 Hz |
| Input Voltage | 380...480 V |
| Control Type | Digital |
| Cooling Method | Air Cooled |
| Protection Features | Overcurrent, Overvoltage, Overtemperature, Short Circuit |
Explanation of safety pictograms and their meanings.
Guidelines for safe handling and operation of the assembly.
Detailed description of the TW63 drive's physical components.
Explanation of the gear drive's operation and its main components.
Specifications and performance data for the TW63 drive.
Visual representation and measurements of the machine.
Specifications and mounting details for the optional base frame.
Details on available encoder types for the TW63.
Instructions for connecting the motor to the drive unit.
Wiring diagram for DEE motors and magnetic clamps.
Wiring diagram for motors compliant with BV 6531-21.
Wiring diagram for motors compliant with BV 6531-22.
Wiring diagram for VFD motors.
Instructions for installing the rope guard on the traction sheave.
Procedures for operating the machine in emergency situations.
Details on lubricants, replacement intervals, and oil change procedures.
Procedure for checking and measuring gear backlash.
Step-by-step guide for replacing brake shoes.
How to adjust the machine's braking deceleration values.
Adjusting brake block stroke and armature base plate for proper function.
Instructions for removing and installing the traction sheave.
Steps for replacing the motor unit.
Procedure for inspecting and managing oil or grease leaks.
Information on the brake monitoring circuit and its setup.
Instructions for using the blocking clamp during installation.
Table of tightening torques for various mounting screws.
To Next Page
