OPERATING MANUAL TW63 SAFETY
ThyssenKrupp Aufzugswerke GmbH
1.2 Safety instructions
Notes regarding this operating manual
A requirement for safe handling and non-disruptive operation of this
assembly is knowledge of the fundamental safety regulations.
This operating manual contains the most important information that is
required to operate the assembly safely.
The operating manual, in particular the safety instructions, is to be complied
with by all persons who work on this assembly.
Furthermore, the rules and regulations covering accident prevention that
apply to the installation site are to be complied with.
Obligations of the operator
The operator undertakes only to allow persons to work on the assembly who
• are familiar with the regulations regarding work safety and accident
prevention and have been instructed in handling the assembly.
• have read the chapter on safety and the warnings in this operating
manual.
Note: Check the safety awareness of the personnel at regular intervals.
Obligations on the part of personnel
Persons assigned to work on subassemblies undertake before starting work
to
• observe the regulations regarding work safety and accident prevention.
• read the chapter on safety and the warnings in this operating manual.
Training of the personnel
Only trained and instructed qualified personnel may work on the assembly.
The responsibility of the personnel is to be clearly defined for all tasks
involving commissioning, operation, maintenance and repair.
Organisational measures
The required personal protective equipment is to be provided by the operator.
All existing safety devices are to be tested regularly in accordance with the
maintenance plan.