2UP 300 Service Manual
Failure Directory
01 Initialization failed: abnormal sound /can't touch the limit
02 Initialization failed: no action on an axis
03 Initialization failed: directly power off
04 A certain axis has slight abnormal sound during initialization, but initialization can be done
05 Buzzer has no sound / low volume
06 Software shows that the nozzle temperature or platform temperature is too high
07 Failed to connect UP 300 (USB), USB transfer failed
08 Failed to connect UP 300 (Wi-Fi), Wi-Fi transmission failed
09 Failed to connect UP 300 (Wi-Fi)
10 Failed to register an account (no activation email received)
11 nozzle calibration/alignment failed
12 The nozzle does not extrude filament or the filament is not smooth during extrusion and printing
13 Failed to return activation code from server when printer is activated
14 Prompt insufficient material when transferring model
15 The model displays red when clicking Print, and reports error “Model out of print range” when transmitting.
16 The device does not start printing after the print info appears
17 During printing: Z axis automatically drops / X, Y axis suddenly stops move
To Next Page
Loading...
