TierTime UP300 User Manual

H. Printer Description
[Front]
Power Switch
Filament Bay
Right Side Handle
Top Lid
Ethernet Socket
USB Port
Power Socket
[Right]
[Back]
Quick Start Guide
300
Tiertime Corporation
1765 Landess Ave. #338
Milpitas, CA 95035, USA
Tel: +1 888 288 6124
www.tiertime.com
@Tiertime to share your prints
Sales Department:
sales@tiertime.net
support@tiertime.com
For Local Support:
Contact your local reseller.
Tiertime Corporation
Full User Manual
Global Technical Support :
G. WARNINGS
WARNING, HOT SURFACES!
Extruder and build platform can reach very high temperatures.
WARNING! Fast moving parts. Tie back loose hair, secure
loose clothing and keep all printer doors closed during
operation.
Do not leave the printer unattended during operation. Watch
to make sure the first few layers adhere correctly.
Dual Filters
Build Platform
Waste Tray
Front Door
Touchscreen
USB Port

TierTime UP300 Specifications

General

Brand	TierTime
Model	UP300
Category	3D Printers
Language	English

Summary

General Safety Warnings

Operational Safety Precautions

Key safety measures for printer operation, including hot surfaces, moving parts, and unattended use.

Printer Components Overview

Key Printer Parts

Identifies major external and internal components of the UP300 printer, such as touchscreen, doors, and bays.

Printer Setup and Installation

Unboxing the UP300

Step-by-step guide on how to safely unbox the UP300 printer and remove protective materials.

Printer Installation Steps

Instructions for upgrading the touchscreen, installing the build plate, loading filament, and powering on.

Software Installation

Guidance on downloading and installing the necessary UP Studio software for Windows and macOS.

Starting Your First Print

Initial Print Procedures

Steps to initialize, extrude filament, calibrate, and start a print job using UP Studio software.

Important Cautions

Handling and Safety Cautions

Critical warnings regarding glass parts, extruder/cable handling, hot components, and adult supervision.