Tiesse Imola - ADSL IP WITH A POOL OF PUBLIC AND PRIVATE IP

Configuration examples
IMOLA/LIPARI QUICK START GUIDE
44
set eth1 ipaddr <PRIVATE-IP> netmask <PRIVATE-NETMASK>
set eth1 on
set adsl encap rfc1483-llc
set adsl pvc-number 1
set adsl pvc atm0 pcr 0
set adsl pvc atm0 vpi 8 vci 35
set adsl pvc atm0 ipaddr <PTP-IP-ADDRESS>
set adsl pvc atm0 no-nexthop
set adsl pvc atm0 netmask 255.255.255.252
set adsl pvc atm0 default-route
set adsl pvc atm0 masquerade
set adsl on
Practical example:
set eth0 ipaddr 10.10.113.1 netmask 255.255.255.252
set eth0 on
set eth1 ipaddr 192.168.1.254 netmask 255.255.255.0
set eth1 on
set adsl encap rfc1483-llc
set adsl pvc-number 1
set adsl pvc atm0 ipaddr 85.34.147.98
set adsl pvc atm0 netmask 255.255.255.252
set adsl pvc atm0 no-nexthop
set adsl pvc atm0 vpi 8 vci 35
set adsl pvc atm0 pcr 0
set adsl pvc atm0 default-route
set adsl pvc atm0 masquerade
set adsl on
ADSL IP WITH A POOL OF PUBLIC AND PRIVATE IP
It is described a basic configuration for the ADSL interface with private IP on the LAN interface eth1 and an
IP address of the pool of public addresses on the interface eth0.
In order to enable data exchange with the outside a NAT rule is set for packets from the private LAN.
set eth0 ipaddr <PUBLIC-IP> netmask <NETMASK-IP-PUBLIC>
set eth0 on
set eth1 ipaddr <PRIVATE-IP> netmask <NETMASK-IP-PRIVATE>
set eth1 on
set adsl encap rfc1483-llc
set adsl pvc-number 1
set adsl pvc atm0 vpi 8 vci 35
set adsl pvc atm0 service UBR