EasyManua.ls Logo

Tige R21 - Page 53

Default Icon
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECTION : F E ATU R E S
|
52
can lead to loss of control or a situation which can cause death or serious
injury to the boat driver, passengers, skiers and anyone else who might be
in the vicinity.
Pull-out Cleats
The pull-out cleats allow the cleats to be stowed into the boat’s exterior
when they are not in use. Pull the cleats out when they are to be used and
return them when they are not in use. DO NOT use the cleats for towing or
tying as an anchoring point.
Lockdown Boat Cover—Optional
The lockdown boat cover is designed to protect your boat during trailering
and short-term storage.
Start by installing the cover from the stern of the boat and unfold the cover
as you move it fore. The cover has a label “REAR” to identify the stern end
of the cover.
After the cover is installed, use the clamp strap to draw the cover snug
around the boat, below the rub rail. Pull the excess strap aft, and winch the
clamp to draw the cover. Lock the clamp. Position any excess strap into the
protective boot and zip closed to protect the clamp from possibly making
contact with your boat.
Boat Cover warranty is covered by OEM manufacturer.

Table of Contents

Related product manuals