Tiger Bengal - Step 9: Roof Felt Preparation; Cutting and Preparing Felt Pieces

Pleaseretaininstruconsforfuturereference
11
Step 9:
PREPARING THE ROOF FELT
• Rollfeltoutontoacleanatsurface30minutesbeforeyouneeditsoithasachancetoaenout.
• Take1x12x6rolloffelt.Measurelengthofroofandcut2lowerstripsoffelttosize.(Piece1).Useastraight
 edgetoguidecung.Theocut(Piece2)willbeusedinStep11.
NOTE: USE THE SAME ANGLE CUT FOR BOTH PIECES.(Detail H1)
NOTE: THE EDGE OF THE FELT (PIECE 2) WILL NOT BE FLUSH WITH THE RIDGE. THIS WILL BE
COVERED BY CUT FELT IN STEP 9.4.
(Detail H2)
• Repeatforsecond12x6rolloffelt.
• Cut10mrollinto4equallengths.(2.5m)
NOTE: DO NOT FELT THE ROOF PANELS AT THIS STAGE.
ROOF PANEL BROOF PANEL A
PIECE 1
PIECE 2
PIECE 1 PIECE 2
PIECE 2 PIECE 1
3150
1335
1335
3150
75mm
OVERLAP