Tiger BLAKE - Step 13: ATTACH ROOF FASCIA BOARDS; Step 14: LAY FLOORBOARDS

Pleaseretaininstruconsforfuturereference
Step 13:
ATTACH ROOF FASCIA BOARDS (BARGEBOARDS)
• Aachfrontrooffasciatothehighsideofthecabinusing4xN40evenlyspacedperfasciaboard,ensuring
 totrapthefeltinbetween.
(Detail K)
• Makesureoverhangsarespacedevenly.
• Onlargercabins,thismaybesuppliedin2ormoresecons.
• Aachrooffasciastogablesusing3xN40perfasciaboard.Securethroughbaen(highside),
 apurlinandbaen(lowside).
NOTE: THERE ARE NO BARGEBOARDS SUPPLIED FOR LOW SIDE OF ROOF AS THIS WILL
PREVENT EFFECTIVE WATER DRAINAGE.
K
N40
Step 14:
LAY FLOORBOARDS
• Starttolaytheoorboards.Thereshouldbea2.5mmgap
 betweentheedgeoftheoorboardsandtheouter
 logstoallowforexpansionandcontracon.
• Nailtheoorboardstothetanalisedbearersbelowwith
 2xBA40evenlyspacedperoorboardpertanalisedbearer.
• Thelastboardwillneedcungdowntosize.Ifinstalling
 anyparons,pleasereturntoStep6.
15
CUT FLOORBOARD TO SIZE