33
32
33
Removing and attaching the inner lid
Pull the inner lid towards you to remove it.
To reattach, align the inner lid gasket with the shaft on the main lid.
Inner lid
Inner lid gasket
When attaching the inner lid, set it on the main lid by pressing the center of the inner lid without applying
excessive force.
Applying excessive force or pressing the edge of the inner lid may cause the inner lid to become deformed.
Attaching the inner lid gasket
If the inner lid gasket is loose, press it rmly back into place.
Inner lid gasket
Removing and attaching the steam cap
Removing the steam cap
1
Insert your nger into the hole
in the lid and lift the steam cap
upwards.
Steam cap
2
Turn the inside portion of the
assembly as shown in the
illustration to loosen it.
3
Lift up on the inside portion to
separate it from the cap.
Attaching the steam cap
1
Set the inside portion of the
assembly on top of the cap
portion.
2
Turn the inside portion of the
assembly as shown in the
illustration to tighten it.
Align the markings.
3
Attach the steam cap back in
the lid.
To Next Page
Loading...
Need help?
General
