35
34
35
English
Removing and attaching the lid
Remove the steam cap, and then fully open the lid and pull it upwards.
1
Remove the inner lid.
2
Remove the lid as shown in the
gure below.
To attach it, reverse the above steps.
Note
● As the heat sink is extremely hot immediately after use, wait until the lid has been cooled enough before
removing it.
Removing and attaching the steam cap
Removing the steam cap
1
Insert your nger into the hole
in the lid and lift the steam cap
upward.
Steam cap
Note
● Be careful of the hot steam contained in the
steam cap immediately after cooking.
2
Flip the steam cap over and
remove the cap body as shown
in the gure below.
(2) Open
(1) Push
(3) Remove
This part is not
removable; do not
attempt to remove it.
Attaching the steam cap
1
Hook the cap body onto the cap
lid.
Cap body
Cap lid
Align here
to hook
2
Push the cap body until you can
here it clicks.
3
Attach the steam cap securely
onto the lid.
To Next Page
Loading...
Need help?
General
