Tiger MALAYAN - Step 2: Garage Door Frame Assembly

Please retain instrucons for future reference
Step 2:
GARAGE DOOR FRAME ASSEMBLY
• To begin with locate the metal door strip with two tanalised bearers pre-aached and the two sides of the
door frame, these will have the hinge pins pre-aached.
• Lay the components out on the ground and then x the metal door strip to the sides of the door frame using
1x S60 per post.
(Detail B)
• Slot the door head in to place on top of the door frame sides and x this place with 1x S60 per post.
• You can then move this secon to an upright posion and lay out the other pieces of tanalised bearer as per
your construct diagram.
DOOR POST (RH)
B
S60
07
S60 S60
DOOR POST (LH)
METAL BAR