Please retain instructions for future reference
23
Step 16:
DOOR FASCIA ASSEMBLY
(MODULE PACKS: FXCD1/2/3 & U)
• Open Module Pack “U”.
• Take door frame and attach the external fascias only. On
a door, the external side fascias are the longer of the two
supplied. (1770mm)
• Attach side fascias rst. Secure using 3x S35 evenly
spaced per fascia. Angle pilot hole rst and then screw
through fascia board into frame.
• Repeat the process for the header and bottom fascia
board using 3x S35 evenly spaced per fascia.
S35
S35
To Next Page
Loading...
