Please retain instructions for future reference
25
Step 18:
DOOR INSTALLATION
• Once external fascias have been tted, offer door up to the opening as shown.
• Make sure door is positioned centrally, resting on the last tanalised bearers on the oor within the opening.
NOTE: THERE WILL BE A GAP EITHER SIDE TO ALLOW FOR MOVEMENT OF LOGS.
• If door is on side of cabin, rest door on the half log.
• Secure the door to the walls using 7x S35 evenly spaced.
• Internal fascias can be installed at this point. These are xed to the door frames only. Do not attach to the logs.
(See Step 14 &15 For Reference)
NOTE: DOORS DO NOT HAVE AN INTERNAL LOWER FASCIA.
Ongoing: As timber is a natural product, any log or board can expand and contract. This may cause slight gapping in the log
cabin which can be rectied by un-screwing and re-screwing fascia boards on the doors and windows outlined
in stages 17 & 18 over the course of the year.
S35
S35
S35
S35
S35
S35
S35
To Next Page
Loading...
