WARNING!
To avoid death or serious injury, do not grind stumps containing
embedded foreign objects such as nails, wire, metal fragments, etc.
EQUIPMENT OPERATION
1. Wear heavy-duty work gloves, ANSI-approved goggles behind a full face shield, steel-toed
work boots, and a dust mask.
2. Securely attach the stump grinder to the tractor’s 3-point hitch system and install the PTO
shaft.
3. Prior to each daily use, check all 34 teeth (#18) and ensure they are not loose, missing, or
damaged, and are torqued to the proper specification. Torque any undamaged loose teeth
to 160 ft•lb (215 N•m) using a torque wrench with a 24 mm socket.
4. Remove the stabilizer pin (# 51) prior to operation as shown below:
To Next Page
Loading...