Timber Tuff Tools TMG-243PT - Intended Use; Technical Specifications; Tools Required

Page
4
of 26
INTENDED USE
This stump grinder is designed for grinding stumps.
TECHNICAL SPECIFICATIONS
Item
Specification
Recommended Horsepower
20 - 45 hp
Flywheel Diameter
24" (610 mm)
Number of Teeth
34
Tooth
Grade 8.8 Carbide Steel, Bolt-in
Tooth Torque Specification
160 ft•lb (215 N•m)
Required PTO Speed
540 rpm
Maximum Cutting Depth Per Pass
5" (127 mm)
Maximum Depth Below Grade
6" (152 mm)
TOOLS REQUIRED
Tool
Specification
Use
Phillips Head Screwdriver
No. 3
Assembly
Wrench/Socket
13 mm (2X)
Assembly
Wrench/Socket
16 mm (2X)
PTO Clutch Run-In
Wrench/Socket
17 mm
PTO Clutch Lock Pin
Wrench/Socket
24 mm
Tooth Replacement
Torque Wrench
Capable of 160 ft•lb (215 N•m)
Multiple
Calliper*
Vernier, Dial, or Digital
PTO Clutch Run-In
Hacksaw**
PTO Trimming
Coloured Pencil/Marker
PTO Clutch Run-In
* Recommended but not required.
** Only if PTO shaft requires trimming. See Trimming the PTO Shaft section for more detail.