Symptom Probable cause Corrective action
The engines sputters
Worn parts
Bring your machine to a TIMBERPRO authorized dealer
Worn piston
Bring your machine to a TIMBERPRO authorized dealer
Worn connector rod bearing
Bring your machine to a TIMBERPRO authorized dealer
The gear is worn
Bring your machine to a TIMBERPRO authorized dealer
The engine overheats
Too much uninterrupted use
Have 10 minute work breaks and let the engine cool
Dirty exhaust pipe
Bring your machine to a TIMBERPRO authorized dealer
The fuel used is not appropriate
Use fuel with an appropriate octane level +
100% synthetic oil
The engine has trouble starting
Dirty carburetor
Bring your machine to a TIMBERPRO authorized dealer
Dirty air filter Clean the air filter.
The fuel filter is stopped up Clean the fuel filter.
The engine stops and can not stay
on idle
Poorly regulated carburetor
Bring the machine to a TIMBERPRO authorized dealer.
If the engine does not function correctly (lack of power, unstable idle, etc.)
In any other case, bring your engine to a TIMBERPRO authorized dealer.
16/109
To Next Page
Loading...
